2022 GETEC-SEMINAR FOR DRIVETESTING INVITATION
Dear friends, We sincerely invite you to participate in our driver testing seminar at GETEC Aldenhoven on 30/06/2022.
In the seminar you will get a complete overview of the testing process in the automotive industry and understanding the main techniques and tools used in testing can help you in your strategic planning for product development. We are fortunate to have our partners: COMPREDICT and Meta, who will share their experience with virtual sensor applications and investigations on the vehicle test bench.
Drive Testing is independent of any dyno capacity, it is possible to evaluate the complete vehicle and the measurements represent the real use on the road, including different weather conditions, different driver types, different road profiles and conditions such as rush hour and traffic jams, etc.
These tests have the following obvious advantages:
- Quick start of the test in the real environment compared to the testbench.
- Representation of the real load compared to the simulated load on the test bench
- Testing of the complete system on the road
- Acquisition of real road data for use on the test bench
| 30.06 | |||
| Time | Topic | Presenter | |
| AM | 9:30-9:45 | Greeting and Introduction | Mr. Joachim Trumpff General Manager GETEC |
| 9:45-10:35 | Vehicle testing on the road
-Advantages of vehicle testing -What should be considered during preparation? -How is the test carried out |
Mr. Torsten Hempel Application Expert GETEC |
|
| 10:35-10:50 | All | All | |
| 10:50-11:20 | How Virtual Sensors Deliver Vehicle Test Data on a Large Scale
-How does a Virtual Sensor work? -Overview of COMPREDICT’s Virtual Sensor Platform -Dedicated data loggers for R&D with LTE and unlimited data volume -Advantages of Virtual Sensors in terms of cost reduction and acceleration of testing and development. |
Dr. Rafael Fietzek Co-Founder – Executive Director COMPREDICT GmbH |
|
| 11:20-11:50 | Data measurement and analysis
-Analysis of driver behavior -Speed and consumption performance testing -Load evaluation -Use of the data for the test cycle |
Mr. Lucas Crampen Application and Testing GETEC |
|
| Noon | 12:00-13:30 | Lunch | |
| PM | 13:30-14:00 | Vehicle test bench investigations
-Different test bench setups for different test objectives -Benchmark investigations -Performance tests -NVH measurement |
Mr. Olaf Metzger Director Hybrid Systems and Controls Meta Motoren- und Energie-Technik GmbH |
| 14:00-15:00 | Vehicle demonstration with sensor and data logger | Mr. Redzo Sakanovic Application and Testing Manager GETEC |
|
| 15:00-15:30 | Product development and optimization based on road load data
-Requirement definition -Product verification and optimization |
Mr. Torsten Langheinrich Design Drivetrain Development Engineer GETEC |
|
| 15:30-16:30 | Testbench tour | Mr. Joachim Trumpff General Manager GETEC |
|
| 16:30-17:00 | Q&A | All | |
| 17:00-17:15 | Certificates | ||
Seminar Information：
Date: 30.06.2022
Time: 9:30-17:15
Venue: GETEC Aldenhoven, Germany
Registration:
Attend for free, order 1st, get 1st.
This seminar is free of charge for our participants and places are limited. Therefore, we strongly recommend that you confirm your place in advance.
Registration is required to guarantee your place: marketing@getec-gmbh.com or Michael.Spielmann@getec-gmbh.com